Brass turned parts. Best machinability, clean surface.
Precision turned parts in brass up to Ø 42 mm. From the classic CW614N to lead-free drinking-water alloys – in small and large series.
Brass turned parts to your drawing – the material with the highest machinability and the most decorative surface in the turned-part range.
Brass is the ideal material for high volumes with short cycle times: machinability is excellent, and surfaces come out clean and bright without secondary finishing. We turn brass precision parts up to Ø 42 mm in any lot size.
The standard is the leaded free-machining alloy CW614N (CuZn39Pb3) with excellent chip breaking. For drinking-water and sanitary applications subject to the EU Drinking Water Directive, we use lead-free, dezincification-resistant alloys such as CW724R.
Its good electrical and thermal conductivity makes brass the preferred material for contact and connector parts in electrical engineering. Brass is also the first choice for decorative visible parts.
More on material science: Turning brass: alloys & chip breaking
Brass grades we machine.
Typical parts
- Fittings and components for sanitary and heating technology
- Contact and connector parts for electrical engineering
- Connection nipples and screw fittings
- Decorative visible and hardware parts
FAQ on Brass turned parts.
Which brass alloys do you turn?+
Can you manufacture lead-free brass for drinking water?+
What are the surfaces like on brass turned parts?+
From what quantity is brass economical?+
Up to what diameter do you turn brass?+
How quickly do I receive a quote?+
Your drawing on our desk.
We check feasibility, suggest optimizations and get back to you within 48 hours with a first assessment – personally, from Reichenbach am Heuberg, Germany.